Rastergraf Topaz, User Manual

Page: 89 / 169

Rastergraf
Connector Pinouts and Cable Information 3-29
3.17 TopazPMC LVDS Extension Cable
The TopazPMC LVDS Extension Cable has two male MDR26 connectors.
It supports dual-link high resolution or two single-link medium resolution
LVDS panels. It is used on the TopazPMC/1L version which has the
MDR26 connector documented in
Section 3.5 .
The cable is the same as the 3M #14B26-SZLB-300-0LC (3 meter with
thumbscrews) cable. Note that the connections are not the same at each
connector, but rather are cross-wired according to the chart on the next
page. By convention, the TopazPMC/1L follows the “Frame Grabber”
end, although, of course, it is a display device, not a frame grabber.
Figure 3-9 TopazPMC LVDS Extension Cable (A31-00735-4012)
3m