Rastergraf
Introduction - 3
Notices
Information contained in this manual is disclosed in confidence and may
not be duplicated in full or in part by any person without prior approval of
Rastergraf. Its sole purpose is to provide the user with adequately detailed
documentation to effectively install and operate the equipment supplied.
The use of this document for any other purpose is specifically prohibited.
The information in this document is subject to change without notice. The
specifications of the Eclipse3 graphics boards and other components
described in this manual are subject to change without notice. Although it
regrets them, Rastergraf assumes no responsibility for any errors or
omissions that may occur in this manual. Customers are advised to verify
all information contained in this document.
The electronic equipment described herein generates, uses, and may
radiate radio frequency energy, which can cause radio interference.
Rastergraf assumes no liability for any damages caused by such
interference.
Rastergraf products are
not
authorized for
any
use as critical components
in flight safety or life support equipment without the written consent of the
president of Rastergraf, Inc.
These products have been designed to operate in user-provided PMC,
CPCI, and PCI-compatible computers. Connection of incompatible
hardware is likely to cause serious damage. Rastergraf assumes no liability
for any damages caused by such incompatibility.
Rastergraf assumes no responsibility for the use or reliability of software
or hardware that is not supplied by Rastergraf, or which has not been
installed in accordance with this manual.
The Eclipse3 graphics boards are manufactured and sold under license
from Curtiss-Wright Controls Embedded Computing (CWCEC). Contact
Rastergraf, Inc. for additional information.
Rastergraf is a trademark of Rastergraf, Inc.
All other trademarks and copyrights are the property of their respective
owners.
Copyright © 2008 by Rastergraf, Inc.
