Rastergraf
1-12 General Information
Environment:
Temperature: 0 to 70 degrees C, operating
-55 to +85 degrees C, storage
Humidity:
5% to 90%, non-condensing
Enhanced Status:
Special order features include:
Three LEDs that can be driven by host CPU software.
A 2Kb Serial EEPROM stores the serial number, display
timing information, and customer specific parameters.
An LM75 thermal sensor provides limit flags and real-time
temperature read-back.
Ruggedization Option:
Rastergraf offers semi-ruggedized versions of the Eclipse3
boards include a MIL-compliant silicone or acrylic
conformal coating and extended temperature testing.
Rastergraf board designs use standard distribution
commercial temperature range parts
. No formal component
tracking is maintained.
.
Boards are protected with either Acrylic (Miller-
Stephenson MS-475) or Silicone (Miller-Stephenson MS-
460) or equivalent and are MIL-I-46058C, Type SR and
MIL-T-152B compliant. The board is tested under extended
temperature conditions as shown on the next page.