Rastergraf
General Information 1-13
Ruggedization Levels:
The following table shows the standard ruggedization
levels. At the time of writing, complete shock and vibration
testing has not been performed, but some boards have been
tested enough to expect full acceptance is possible. Please
contact Rastergraf Sales if you need this information.
Table 1-3 Rastergraf Ruggedization Levels Chart
Spec
Air-Cooled
Level 0
Air-Cooled
Level 50
Air-Cooled
Level 100
Air-Cooled
Level 200
Conduction-
cooled
Level 100
Conduction-
cooled
Level 200
Applicable
Graphics
Board(s)
Argus
Gemini
Sirena
Eclipse3
Topaz
Garnet
Gemini
Sirena
Eclipse3
Topaz
Garnet
Gemini
Sirena
Eclipse3
Topaz
Garnet
Eclipse3
Topaz
Garnet
Garnet Garnet
Operating
Temperature
(4, 6)
0°C to 50°C
-20°C to 65°C
-40°C to 71°C
-40°C to 85°C
-40°C to 71°C
-40°C to 85°C
Storage
-40°C to 85°C
-40°C to 85°C -55°C to 125°C -55°C to 125°C -55°C to 125°C
-55°C to 125°C
Humidity
Operating
0 to 95% non-
condensing
0 to 100% non-
condensing
0 to 100% non-
condensing
0 to 100% non-
condensing
0 to 100% non-
condensing
0 to 100% non-
condensing
Humidity
Storage
0 to 95%
condensing
0 to 100%
condensing
0 to 100%
condensing
0 to 100%
condensing
0 to 100%
condensing
0 to 100%
condensing
Vibration
Sine (1)
2 g peak
15-2 kHz
2 g peak
15-2 kHz
10 g peak
15-2 kHz
10 g peak
15-2 kHz
10 g peak
15-2 kHz
10 g peak
15-2 kHz
Vibration
Random (2)
0.01 g2/Hz
15-2 kHz
0.02 g2/Hz
15-2 kHz
0.04 g2/Hz
15-2 kHz
0.04 g2/Hz
15-2 kHz
0.1 g2/Hz
15-2 kHz
0.1 g2/Hz
15 Hz-2 kHz
Shock (3)
20 g peak
20 g peak
30 g peak
30 g peak
40 g peak
40 g peak
Conformal
Coat (5)
optional
optional
optional
optional
yes
yes
Order
Option (7)
/CA or /CS
/A5A or /A5S
/A1A or /A1S
/A2A or /A2S
/C1A or /C1S
/C2A or /C2S
Notes:
1. Sine vibration based on a sine sweep duration of 10 minutes per axis in each of three mutually
perpendicular axes. May be displacement limited from 15 to 44 Hz, depending on specific test
equipment. Shock and Vibration values not completely verified.
2. Random vibration 60 minutes per axis, in each of three mutually perpendicular axes.
3. Three hits in each axis, both directions, 1/2 sine and saw tooth. Total 36 hits.
4. Standard air-flow is 8 cfm at sea level. Some higher-powered products may require additional
airflow. Consult the factory for details.
5. Conformal coating type to be specified by customer. Consult the factory for details.
6. Temperature is measured at the card interior (not at edge).
7.
Last letter in ordering option: A for Acrylic Conformal Coating, S for Silicone Conformal Coating
