Rastergraf
Installing Your Peritek Graphics Board 2-7
2. Open the computer and remove the CPU board onto which the
graphics PMC board is to be installed. Identify an empty PMC location
(generally there are one or two on a given CPU board). The graphics
PMC board is a Universal PMC/PCI device and can be plugged into a
PMC port which uses either 5V or 3.3V signaling.
3. Take care to optimize airflow by blocking off unused slots in the card
cage, and arrange the boards to permit optimum airflow through them.
Caution
The static electricity that your body builds up normally can seriously
damage the components on the graphics board.
Figure 2-2 Installation of a PMC Module into an Emerson MVME2604
