Rastergraf
Introduction - 1
This manual provides information about how to configure, install, and
program the Rastergraf Eclipse3 128-bit graphics display controllers.
Software support is available for Solaris, Linux, VxWorks, LynxOS, and
Windows 2000 and XP. They are available for PMC PCI, and
CompactPCI compatible computers.
This manual is broken down into four chapters:
Chapter 1: General Information
Chapter 2: Installing the Graphics Board
Chapter 3: Programming Devices and Memories
Chapter 4: Troubleshooting
Chapter 1 provides background material about the graphics boards.
Understanding the information in the chapter, however, is not essential for
the hardware or software installation. If you want to perform the
installation as quickly as possible, start with Chapter 2. If you have
problems installing the hardware, refer to Chapter 4 for help.
