15
When you are directed to the following page you will need to select the same
“Width”
as so it matches the AP you will be trying
to communicate with. (ei. If your AP
“Width”
is set to 40Ghz then your Client (station)
“Width”
must be set to 40GHz as well)
Scroll down the page to the
“Interface Configuration”
section. Here you will type in the same
“ESSID”
name as you used for
the AP that you want to connect to (ei. if your AP
“ESSID”
is Sample1 then your Client (station)
“ESSID”
must be Sample1).
You must also change the
“Mode”
to
“Client (WDS)”
in the drop-down menu. Be sure to click
“Save & Apply”
before you
leave this page. Note: ESSID is case sensitive.
You have now completed the step for setting up a Client (station). . If you find you are having issues or the process is
not configuring correctly contact us by phone at 855-864-9488 or visit our website
www.rapiduswireless.com
.
