4
QUICK START
COMPUTER CONFIGURATION/INSTALL GUIDE
Step 1:
Connect an Ethernet cable from the PC/Laptop to the PC connector on the POE LAN port.
Step 2:
Connect an Ethernet cable from the RL-Series device (radio) to the POE port on the POE.
Step 3:
Connect a PC to the “LAN” port of the POE, with a straight through Ethernet cable
Note: Connect the device (radio) to the “POE” port and the “LAN” port to PC/switch/router. Power the POE unit
Step 4:
Connecting to the device (radio)
Before accessing the configuration interface, you have to change the network connection setting in your computer to be on the
same subnet as the device (radio). Alternatively, you could use the RapiFind Utility program to assign the device (radio) a
temporary IP alias that is on the same subnet as your computer.
Changing the IP address – Windows 8
1.
In your computer, open Control Panel > Network and Sharing Center then click change adaptor settings on the left hand
menu. Select and right click the Ethernet icon.
2.
Then click
Properties.
3.
In the Ethernet Properties > Networking tab, select
Internal Protocol Version 4 (TCP/IPv4)
