58
GB
CORRECTION OF MINOR FAULTS
FAULT
REMEDY
Variation in the height of cut of
Front rolls are not square with the bottom blade.
grass across the width of cut.
Make the necessary adjustments, see page 40.
Grass is cut unevenly in wavy or
Alignment of cutting cylinder has
hummocky fashion.
been upset, probably through running into an
obstruction. Consult your local service centre.
Grass is torn off instead of being
Adjust the cutting cylinder to bottom blade,
cut cleanly.
see page 40 . If the grass is still not cut cleanly, the
cutters require sharpening. Backlap the cutters, see
page 42. If this does not rectify the fault consult your
local service centre.
Grass is removed entirely and the
Bottom blade is set too low. Raise
mower labours.
the height of cut, see page 40.
Mower moves forward sluggishly.
Cylinder may have run into an obstruction. Stop the
engine and clear.
Cuttings not entering grassbox
Concave set incorrectly. To adjust properly.
see page 42.
If thatch or matt start to appear on the green.
Use Verti-Groom attachment * or fit comb.