
en-12
3 SAFETY
o
Keep the mower and the engine clean.
p
Allow the engine to become cool before storage and always remove the ignition key.
q
Keep all nuts, bolts and screws tight to make sure the equipment is in safe condition.
r
Replace worn or damaged parts for safety. Replace damaged or worn decals. Only use parts, accessories
and attachments approved by Jacobsen.
s
To decrease the fire hazard, remove materials that burn from the engine, muffler, battery tray and fuel tank
area.
t
Disconnect the battery and controller connectors before you weld on this mower.
3.1.6
When you Put the mower on a trailer
a
Be careful when you load or unload the mower on a trailer. Trailer must be wider than the mower and can
carry the weight of the mower.
b
Use a full-width ramp to load or unload the mower on a trailer.
c
Use straps, chains, cables or ropes to fasten the mower to the trailer. Both front and rear straps must be
sent down and toward sides of trailer.
Make sure that all latches are correctly fastened.
Summary of Contents for 51 Marquis
