P
22
METHOD 1: Bend a stiff wire or wire coat hanger into a small hook as shown and run the
hook through the Burner Tube and inside the Burner several times to remove debris.
METHOD 2: Use a bottle brush with a flexible handle and run the brush through the
Burner Tube and inside the Burner several times to remove any debris.
METHOD 3: Use an air hose to force air through each burner Tube. The forced air should
pass debris or obstructions through the Burner and out the Ports.
Regardless of which Burner cleaning procedure you use, we recommend you also complete the
following steps to help prolong Burner life.
1. Use a fiber pad or nylon brush to clean the entire outer surface of each Burner until free of
food residue and dirt.
2. Clean any clogged ports with a stiff wire, such as an open paper clip.
3. Inspect each Burner for damage (cracks or holes) and if such damage is found, order and
install a new Burner. After installation, check to ensure that the Gas Valve Orifices are
correctly placed inside the ends of the Burner Tubes. Also check the position of your Spark
Electrode.
WARNING
For safe operation ensure the Gas Valve Assembly Orifice is inside the Burner Tube before
using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may
cause explosion and/ or fire resulting in serious bodily injury and/or property damage.
When an appliance is supplied on casters and is connected to the supply piping by means of a
connector for movable appliances, the operator shall aware there is a restraint on the appliance
and, if disconnection of the restraint is necessary, to reconnect this restraint after the appliance
has been returned to its originally installed position.
Figure 1
!
!
Summary of Contents for ST1017-012939
Page 4: ...P 4 Product Diagram...
Page 23: ...P 23...
