P
18
7.
Set all Control Knobs to OFF and open the right-side tank valve SLOWLY 1/4 of a turn.
8.
To light the four right-side burners, push and turn the forth Control Knob from the right to
HIGH. This is considered the middle right Control Knob.
9.
Immediately press the right-side Electric Igniter for 3-4 seconds to light the Burner.
10. If ignition does not occur in 5 seconds, turn the burner Control Knob(s) and gas source
OFF and conduct a leak test of ALL gas connections and gas sources as explained in
the Use and Care section of this manual. If no leaks are detected, wait 5 minutes for any
gas to clear and repeat the lighting procedure.
11. After one Burner is lit, turn the tank valve SLOWLY one more 1/4 of a turn for 1/2 of one
complete turn.
12. Once one Burner is lit, the adjacent Burner can be lit by turning its Control Knob to
HIGH.
13. To light the four left-side burners repeat step 7 and 8 then press the left-side Electric
Igniter.
DANGER
The gas pressure regulator provided with this appliance must be used. This regulator is set
for an outlet pressure of 11 iwc.
!
!
Summary of Contents for ST1017-012939
Page 4: ...P 4 Product Diagram...
Page 23: ...P 23...
