Rankam ST1017-012939, Operator'S Manual

Page: 12 / 24

P 12
Be sure all Control Knobs are set to “OFF” and open the Grill Lids
Have your assistant stand behind to the right of the grill and look toward the front of the grill bowl. Never put
your face inside the Grill Head.
Press the Igniter Cap, You should hear a “clicking” sound. Your assistant should see a blue spark within
each Gas Collector Box. If a spark is present Electrode Tips are properly positioned..
If no spark is seen, the Spark Gap needs to be adjusted as follows:
If no spark is seen, the Spark Gap Electrode Tip and Receiver is more than 3/16” use long nose pliers
to gently squeeze the Gas Collector Box to narrow gap.
Recheck the Electrode again, if no “clicking” sound is heard:
AA Battery is installed backwards.
Electric wires may be loose. Remove the AA Battery and inspect the lgnitor Junction Box found
behind the Control Panel and reconnect any loose wires.
Final Grill Assembly Step
When you have finished assembling your grill
be sure that all screws and latch are tightened
for safe operation of your grill.
WARNING
Failure to read and follow the Use and Care Instructions could result in a fire or explosion that
could cause serious bodily injury, death or property damage.
Transporting or Storing your grill
:
1. Lock grill Casters.
2. Remove LP Gas tank, Grease Receptacle and Grease Tray from your grill. Place Grease
Receptacle on Lower Grease Tray Bracket. See Fig.1.
3. Loosen 4 Latches on Grill Bowl and Cart. With an assistant. Lift and position Grill Bowl on
a cardboard surface.
4. Loose the bolt #3 and let the 4 cart frame bracket rest on the cart. In order to avoid
loosing the 4 pieces bolt, make sure that they are screwed on the folding legs again .
Then fold the Cart Legs onto Cart Frame. See Fig.1.
5. With an assistant, lift and position Grill Bowl onto the folded Cart. See Fig.2.
6. Be sure grill is secured tightly and covered when being transported.
Fig.1 Fig.2
! !