Rangevision PRO, Setup And Calibration Instructions

Page: 29 / 31

The​ ​ fast​ ​ calibration​ ​ can​ ​ be​ ​ accessed​ ​ from
the​ ​ Calibration​ ​ window​ ​ on​ ​ the​ ​ Start​ ​ screen​ .
● mount​ ​ the​ ​ calibration​ ​ plate​ ​ at​ ​ the​ ​ central
position​ ​ in​ ​ the​ ​ distance​ ​ to​ ​ the​ ​ scanner
(the​ ​ first​ ​ calibration​ ​ position),
● press​ ​ the​ ​ Capture​ ​ button,
● next,​ ​ following​ ​ the​ ​ steps,​ ​ make​ ​ two​ ​ more
shots,
● after​ ​ this​ ​ the​ ​ accuracy​ ​ will​ ​ be​ ​ shown.
It​ ​ should​ ​ be​ ​ approximately​ ​ equal​ ​ to
the​ ​ accuracy​ ​ value​ ​ of​ ​ the​ ​ last​ ​ calibration.
If​ ​ the​ ​ accuracy​ ​ during​ ​ orienting​ ​ starts​ ​ to​ ​ be​ ​ very
different​ ​ from​ ​ the​ ​ original​ ​ one,​ ​ you​ ​ need​ ​ to
re-calibrate​ ​ the​ ​ equipment.
Example:​ ​ The​ ​ initial​ ​ accuracy​ ​ is​ ​ 0.024,​ ​ accuracy​ ​ after​ ​ fast​ ​ calibration​ ​ is​ ​ 0.065.​ ​ The​ ​ value
exceeded​ ​ 0.05,​ ​ re-calibration​ ​ is​ ​ required.
29