Rangevision PRO, Setup And Calibration Instructions

Page: 27 / 31

2. In​ ​ accordance​ ​ with​ ​ the​ ​ text​ ​ prompt​ ​ and​ ​ symbol​ ​ image​ ​ install​ ​ the​ ​ calibration​ ​ plate
in​ ​ the​ ​ desired​ ​ position.​ ​ The​ ​ brightness​ ​ of​ ​ the​ ​ images​ ​ of​ ​ calibration​ ​ plate​ ​ can​ ​ be
adjusted​ ​ with​ ​ exposure​ ​ controller.​ ​ You​ ​ should​ ​ not​ ​ allow​ ​ very​ ​ dark​ ​ images​ ​ or
images​ ​ with​ ​ excessive​ ​ brightness​ ​ areas.​ ​ Press​ ​ the​ ​ Capture​ ​ button.​ ​ Original​ ​ plate
position​ ​ -​ ​ the​ ​ position​ ​ at​ ​ the​ ​ working​ ​ distance​ ​ from​ ​ the​ ​ scanner​ ​ (marking​ ​ on​ ​ the
view​ ​ from​ ​ cameras​ ​ matches​ ​ the​ ​ markers​ ​ on​ ​ the​ ​ plate),​ ​ the​ ​ cross​ ​ is​ ​ projected​ ​ on
the​ ​ central​ ​ marker.
3. If​ ​ the​ ​ plate​ ​ is​ ​ placed​ ​ incorrectly,​ ​ a​ ​ message​ ​ will​ ​ appear.​ ​ Correct​ ​ the​ ​ placement​ ​ and
repeat​ ​ the​ ​ capture.
In case if not all marks are found on the image, you will also see an error message. It
may mean the following:
● not all markers are visible on one of the snapshots,
● not all markers are lit by the projector,
●
calibration plate is mounted at large angle to the scanner,
● the plate is too close or too far from the scanner - the image is not sharp,
● the plate is damaged or dirty.
Please​ ​ correct​ ​ all​ ​ deficiencies​ ​ and​ ​ press​ ​ Capture​ ​ .
27