Rangevision PRO, Setup And Calibration Instructions

Page: 18 / 31

Adjustment of the projector focus
During the scanner operation the projector projects structured light to the object - coded
lines and stripes. To ensure that the lines are sharp, the projector must be focused on
the working distance of the scanner.
By switching the mode "Lines and Stripes", adjust the focus of the projector, so that the
lines on the calibration plate were as sharp as possible. Using the zoom ring set the
minimum possible area of projector light.
After​ ​ changing​ ​ the​ ​ illumination​ ​ area​ ​ check​ ​ the​ ​ projector​ ​ focus.
18