Rangemaster Elite 110 Dual Fuel, User Manual

Page: 36 / 40

36
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Pull the unit forward to access the rear of the appliance.
Remove the hotplate - see 2. Remove the cover box and
disconnect all HT leads at the generator. Disconnect the
lead at the electrode. Pull the sleeved bundle of HT leads
up through the rear upright. Pull the appropriate lead from
the sleeve and push in the replacement. Replace the leads
in the rear upright. Re-connect the leads at the generator
and oven electrode. Re-assemble in reverse order and check
ignition.
19 To Remove Oven Inner Back
Open the oven door. Remove oven furniture. For the LH
oven unscrew the 2 thermostat phial fixing screws.
Remove the fixings that secure the inner back to the oven
rear.
Lift the removable panel away. Re-assemble in reverse
order. Ensure that the retaining fixings are fully tightened.
For the LH oven unscrew the 2 thermostat phial fixing
screws. Remove the screws that secure the inner back to
the oven rear. Lift the removable panel away. Re-assemble
in reverse order. Ensure that the retaining fixings are fully
tightened.
20 To Replace an Oven Fan
Disconnect from the electricity supply.
Pull the unit forward to access the cover boxes at the rear of
the appliance. Remove the fixings that secure the cover and
lift it clear. Remove the fan wiring, noting the connection
positions. Remove the inner back as detailed in Section 22.
Hold the fan blades and undo the centre nut (LH thread),
brass washers, fan blade and circlip. Undo the fixings that
retain the fan and remove it from the cavity rear. Fit the
replacement and re-assemble parts in reverse order. Check
that the oven operates satisfactorily.
21 To Remove an Oven fan Element
Disconnect from electricity supply.
Pull the unit forward to access the cover boxes at the rear
of the appliance. Remove the fixings that secure the cover
and lift it clear. Undo the terminal connections noting their
positions. Remove the inner back as detailed in Section 22.
Remove the fixings that secure the element within the oven
and lift the element away carefully. Fit the replacement
element and re-assemble parts in reverse order. Check that
the oven operates correctly.
22 To Remove the LH Oven Bottom and Top
Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at the rear
of the unit. Remove the fixings that secure the cover and lift
it clear.
Remove the 2 screws ‘A’ and allow the plate to drop down.
Remove the 2 screws B, lower the upper plate and remove
through the slot in the cooker back.
Undo the terminal connections, noting their positions.
Remove the element fixings and withdraw element. Replace
the element and re-assemble parts in reverse order.
Top Element
Open the LH oven door and undo the fixings that secure the
heat shield. Remove the top element bracket fixings and
withdraw element. Replace the element and re-assemble
parts in reverse order. Check that the oven operates
satisfactorily.