Rangemaster Elite 110 Dual Fuel, User Manual

Page: 19 / 40

19
A electrode notch B ignition electrode
Now fit the two trim rings, making sure that they are
sitting down properly.
Griddle
Always clean the griddle after use. Allow to cool
completely before removing. Immerse the griddle plate
in hot soapy water. Use a soft cloth or, for stubborn
stains, a nylon washing up brush.
NEVER USE CAUSTIC OR ABRASIVE CLEANERS AS THESE
WILL DAMAGE THE SURFACE.
Handygrill
The pan and grid should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak
for a few minutes in the sink immediately after use.
Stubborn particles may be removed from the grid by
using a nylon brush.
Control Panel and Doors
Avoid using any abrasive cleaners including cream
cleaners, e.g. Cif, on brushed Stainless Steel surfaces. For
best results use a liquid detergent e.g. Domestos Multi
Surface Cleaner.
The control panel and control knobs should only be
cleaned with a soft cloth wrung out in clean hot soapy
water. Wipe with a clean dampened cloth then polish
with a dry cloth. The oven doors should only be cleaned
with a soft cloth wrung out in clean hot soapy water.
Ovens
The ovens have removable panels that have been coated
with a special enamel that partly cleans itself. This does
not stop all marks on the lining, but helps to reduce the
amount of manual cleaning needed.
The Cook & Clean panels work better above
200°C. If you do most of your cooking below this
temperature, occasionally remove the panels and
wipe with a lint free cloth and hot soapy water.
The panels should then be dried and replaced and
the oven heated at 200°C for about one hour. This
will ensure the Cook & Clean panels are working
effectively.
Don’t use steel wool (Brillo) or any other materials that
will scratch the surface. Don’t use oven cleaning pads.
Removing the Oven Linings
Some of the lining panels can be removed for cleaning
and for cleaning behind.
Remove the shelves first.
On some models the right hand fanned oven has a
removable oven roof - if fitted slide the roof liner forward
and remove.
The side panels of either oven can be removed.
Each side of the oven is fixed with four fixing screws. You
don’t have to remove the screws to remove the oven
linings. Lift each side panel upwards and they will slide
off the screws. Then pull them forwards.
Once the linings are removed, the oven enamel interior
can be cleaned.