Rangemaster Elite 110 Dual Fuel, User Manual

Page: 25 / 40

25
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
You will need the following equipment
to complete the cooker installation
satisfactorily
STABILITY BRACKET
If the cooker is to be supplied
with gas through a flexible hose, a
stability bracket or chain must be
fitted.
These are not supplied by with the cooker but are
available at most builders’ merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with the
relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if fitting the cooker on
a stone or concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a stone or concrete
floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. Screws for fittingstability bracket
Checking the parts
4 pan supports Griddle plate
Wok Ring Allen key
4 flat oven shelves and 1 drop
shelf Levelling tool
Handygrill pan / Meat tin Handygrill rack
2 side extensions Self adjusting front plinth and
plinth trim plate
Positioning the Cooker
The diagrams below show the minimum recommended
distance from the cooker to nearby surfaces.
The cooker should not be placed on a base.