EcoPro300
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
26.) Mount gas cylinder to the sawbar handle and tighten nut
27.) Place large safety cage on the end without any bolts, remove all 10mm
nuts & bolts, place blue chainsaw cover on the end of safety cage and line
up the bolt holes, tighten all 10mm nut & bolts
28.) Remove 13mm nuts from bar oil tank and mount tank to the chainsaw
safety cover, tighten 13mm nuts.
29.) Remove 10mm nut & bolt from safety cage pivot point and remove
cotter pin from round bar on safety cage
30.) Set safety cage in place
