EcoPro300
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
20b) If you decide to use the gas cylinder, remove the 18mm bolt at the
end of the swivel plate shaft beside the spring
20b) Slide the swivel plate up and remove the spring, slide the plate back
into place and re-tighten the bolt
21.) Mount sawdust chute to side of processor with Allan head boolts and
10mm nuts
22.) Mount small safety cage with 4 13mm nuts and bolts
23.) Remove 2 - 18mm bolts from swivel plate
24.) Mount Chainsaw arm to swivel plate and tighten 2 – 18mm bolts
25.) screw the gas cylinder into the swivl head that is already mounted to
the small safety cage (if using gas cylinder to return sawbar and not using
the spring in step 20)
- If you are using the spring skip steps 25 & 26
