![background image](http://html1.mh-extra.com/html/rands/zna67ext/zna67ext_getting-started_3278494041.webp)
Basic operation
R&S
®
ZNA67EXT
41
Getting Started 1179.6295.02 ─ 02
9.1
Required equipment
The cabling of the external test sets is described in
To calibrate the measurement setup, the following equipment is required:
●
For power calibration and leveling at the 1
mm port of the external test set, a
power meter that covers the measured frequency range, such as the thermal
power sensor R&S
NRP110T.
(for the latter an additional 1
mm
f/f adapter is required)
●
Suitable adapters for scalar power calibration of the LO IN and RF IN signals
at the external test set
●
For system error correction, a 1
mm calibration kit that covers the measured
frequency range, e.g the R&S
ZV-Z210
9.2
Converter configuration
Convenient converter configuration is provided with software option R&S
ZNA-K8,
which is already preinstalled on your R&S
ZNA.
1. At the graphical user interface of the R&S
ZNA , open the "Converter Configu-
ration" dialog (System – [Setup] key > "Frequency Converter" tab > "Fre-
quency Converter ...").
Converter configuration