![background image](http://html1.mh-extra.com/html/rands/zna67ext/zna67ext_getting-started_3278494017.webp)
Preparing for use
R&S
®
ZNA67EXT
17
Getting Started 1179.6295.02 ─ 02
RF and LO cables between VNA test ports and diplexers are not part of the
standard delivery. See
5.2
Choosing the operating site
Specific operating conditions ensure proper operation and avoid damage to the
product and connected devices. For information on environmental conditions
such as ambient temperature and humidity, see data sheet.
5.3
Adjusting the feet of the test set
The frequency converter can be used with three or four feet attached to the bot-
tom side. If possible, use three feet: two in front and one in the middle of the rear.
Figure 5-1: Setup with one rear foot (left) and two rear feet (right)
Two additional feet support the diplexer. Typically, the external test set can be
aligned as follows:
1. Screw the diplexer feet and the front feet into the instrument as far as possi-
ble.
Adjusting the feet of the test set