Connecting the external test sets
R&S
®
ZNA67EXT
33
Getting Started 1179.6295.02 ─ 02
8
Connecting the external test sets
The R&S
ZNA67EXT is delivered with fully assembled external test sets, each
consisting of a diplexer R&S
ZVA-ZD110 and a frequency converter R&S
ZVA-
Z110. The "internal" connection between the diplexers and frequency converters
is described in
System component information
A label on the rear panel of the network analyzer shows the diplexer and con-
verter units with their position. The label contains the following information.
System ID
<System label>
System Components
<R&S ZNA67 label>
<Diplexer label>
<Converter label>
Port 1
<Diplexer label>
<Converter label>
Port 2
<Diplexer label>
<Converter label>
Port 3
<Diplexer label>
<Converter label>
Port 4
Figure 8-1: System component information
Compliance with rated specifications
Compliance with the rated specifications requires a system setup according
to the rear panel labeling at the R&S
ZNA67. If you interchange the deliv-
ered test sets, or if you use test sets from other R&S
ZNA67EXT VNA sys-
tems, the rated specifications cannot be guaranteed.