![background image](http://html1.mh-extra.com/html/rands/zna67ext/zna67ext_getting-started_3278494026.webp)
System tour
R&S
®
ZNA67EXT
26
Getting Started 1179.6295.02 ─ 02
●
The connection underneath the waveguide flange ensures the power supply
of the diplexer.
An additional metal clamp at the bottom ensures mechanical stability.
Left vs. right model variant
The diplexer R&S
ZVA-ZD110 is available in a left variant and a right variant.
●
The left variant (Var 12) is designed for the left side of the standard arrange-
ment
with two external test sets
. Its connector panel is located on the left
side of the diplexer, i.e. it is oriented towards the VNA.
The RF High Out and H/L SWITCH switch connectors are located on the top
left and top right, respectively.
●
The right diplexer variant (Var 18) is designed for the right side of the standard
arrangement with two test sets. Its connector panel is located on the right of
the diplexer, i.e. it is oriented towards the VNA.
1
1
2
2
3
3
6
6
4
4
5
Figure 6-6: Left vs. right model variant (rear view)
Left = Left variant (Var 12)
Right = Right variant (Var 18)
1
=
2
= RF High Out connector
3
= Waveguide connector
4
=
5
=
6
= Power supply connector
RF High Out, waveguide, and power supply connector can also be seen and are
described below
Diplexers