Trying Out the Instrument
R&S
®
SMBV100B
53
Getting Started 1423.1049.02 ─ 02
Figure 5-7: Simplified representation of a test setup for signal monitoring**
** = The figure depicts the cabling as a general principle
4. Use a suitable cable to connect the
connector of the R&S
SMBV100B
to the monitoring instrument.
To learn more about this topic, refer to chapter "Regular Marker Output Sig-
nals" in the user manual.
5.5
Verifying the Generated Signal with the Graph-
ics Display
It is often useful to check the spectra of the configured signals, before you enable
the RF output of the instrument.
The R&S
SMBV100B provides a build-in function to represent the generated sig-
nal on a graphical signal display. We demonstrate this feature by showing the
characteristics at one particular point of the signal processing chain. You can,
however, display the signal characteristics at other different stages.
This example shows you how to use this graphical display to verify the generated
signal. Use the signal generated in
Chapter 5.4, "Enabling and Configuring a
To access the graphical signal display functionality
► Perform one of the following:
Verifying the Generated Signal with the Graphics Display
