Preparing for Use
R&S
®
SMBV100B
19
Getting Started 1423.1049.02 ─ 02
Risk of instrument damage due to insufficient airflow in a rack
If the instrument is run with insufficient airflow for a longer period, the instru-
ment overheats, which can disturb the operation and even cause damage.
Make sure that all fan openings are unobstructed, that the airflow perfora-
tions are unimpeded, and that the minimum distance from the wall is 10
cm.
3.1.5
Connecting AC Power
The R&S
SMBV100B is equipped with an AC power supply connector, that can
be operated with different AC power voltages. Once it is connected, the instru-
ment automatically adjusts to the given voltage. Refer to the data sheet for the
requirements of voltage and frequency. There is no need to set the voltage man-
ually or change fuses.
The
To connect the AC supply
► Connect the R&S
SMBV100B to the AC power source using the supplied
power cable.
Note:
Since the instrument is designed in compliance with standard EN
61010-1 safety class I, it must only be connected to an outlet that has a
ground contact.
Characteristics of the AC power supply:
●
100 V to 240 V AC
●
Max 3.5 A to 1.6 A (50 Hz to 60 Hz)
●
Max 3.5 A to 2.9 A (400 Hz)
3.1.6
Turning the Instrument On and Off
To turn on the R&S
SMBV100B
1.
Connect the instrument to the AC supply
.
Putting into Operation
