Instrument Tour
R&S
®
SMBV100B
38
Getting Started 1423.1049.02 ─ 02
LF
Output for internal LF generator signal.
See also data sheet and user manual, section "Analog Modulation".
Mod Ext
Input for external analog modulation signals.
Pulse Video
Output of the internal pulse generator signal or the looped through pulse signal
from Pulse Ext connector (video signal).
Pulse Ext
Input for an external pulse modulation signal or an external trigger/gate signal for
the pulse generator.
Signal Valid
Output signal that marks the valid signal times (valid level and frequency) for all
analog modulations.
Inst Trig
Input for external trigger of sweeps and list mode.
IEC 625/IEEE 488
GPIB-bus interface for remote control of the instrument.
The IEC 625 interface is in compliance with IEEE488 and SCPI. A computer for
remote control can be connected via this interface. To set up the connection, we
recommend that you use a shielded cable.
Note:
To avoid electromagnetic interference (EMI) caused by open lines, always
terminate any connected IEC-bus cable with an instrument or a controller.
See also "Annex: Hardware Interfaces" and chapter "Network and Remote Con-
trol" in the user manual.
Non-Volatile Memory
Option: R&S
SMBVB-B80
Slot for removable mass storage.
Rear Panel Tour
