![background image](http://html2.mh-extra.com/html/rands/smbv100b/smbv100b_getting-started_3082339038.webp)
Instrument Tour
R&S
®
SMBV100B
36
Getting Started 1423.1049.02 ─ 02
15
= IEC 625/IEEE 488 connector
16
= Non-Volatile Memory
17, 19 = USB/USB In connectors
18
= LAN connector
20
= AC power supply connection and main power switch
4.2.1
Connectors
User x
Multipurpose connectors. The input/output signal has to be defined.
The
lists the signals assigned to the User x connectors in the default
instrument state.
Table 4-9: Default configuration of the User x connectors
User connector
Direction
Default assigned signal
3
Input
Global Trigger
4
Input
Global Next Segment
5
Output
Baseband Sync Out
A dedicated LED indicates the connector status:
●
Green: an input connector
●
Yellow: an output connector
●
No light: the connector is not active
See also chapter "Global Connector Settings" in the user manual.
I/Q, I/Q Bar
Direct (single-ended) or differential output for the analog I/Q signal.
See also "Analog I/Q Output Settings" in the user manual.
Dig I/Q
Connectors for the input of a digital I/Q signal from a Rohde
&
Schwarz instru-
ment, like a signal generator.
HS Dig I/Q
Connectors for the input of high-speed digital I/Q signals, for example, from
Rohde
&
Schwarz instruments.
For more information, see data sheet.
Rear Panel Tour