manualshive.com logo in svg

R&S RTE, Getting Started

Share
Download
R&S RTE Getting Started Download Page 25

Preparing for use

R&S

®

RTE

25

Getting Started 1326.1026.02 ─ 10

Installing USB devices on R&S

 

RTE is easy under the Windows operating sys-

tem, because all USB devices are plug&play. After a device is connected to the
USB interface, Windows automatically searches for a suitable device driver.

If the operating system does not find a suitable driver, it prompts you to specify a
directory that contains the driver software. If the driver software is on a storage
media, connect the appropriate drive to the instrument before proceeding. If the
instrument is integrated in a network, you can also install driver data stored in a
network directory.

When a USB device is disconnected from the R&S

 

RTE, Windows immediately

detects the change in hardware configuration and deactivates the corresponding
driver.

The properties of external USB devices are configured in the operating system,
not in the R&S

 

RTE software. It is recommended that you use mouse and key-

board to access and modify the settings of the Windows operating system.

To access Windows, press the Windows key on the external keyboard, or select
"File" > "Minimize Application" on the R&S

 

RTE menu.

Connecting a USB flash drive

If the installation of a USB flash drive is successful, Windows informs you that the
device is ready to use. The device is made available as a new drive ("D:") and is
displayed in Windows Explorer. The name of the drive depends on the manufac-
turer.

Connecting a keyboard

The keyboard is detected automatically when it is connected. The default input
language is English – US.

To configure the keyboard properties:

1. Tap the "Find" icon (magnifier) on the Windows taskbar.

2. Type 

keybord

.

3. Select "Edit language and keyboard options".

Connecting a mouse

The mouse is detected automatically when it is connected. To configure the
mouse properties:

1. Tap the "Find" icon (magnifier) on the Windows taskbar.

Connecting external devices

Summary of Contents for RTE


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands