manualshive.com logo in svg

R&S RTE, Getting Started

Share
Download
R&S RTE Getting Started Download Page 24

Preparing for use

R&S

®

RTE

24

Getting Started 1326.1026.02 ─ 10

To disconnect from power

The product is in the standby state.

1.

NOTICE! 

Risk of data loss. If you disconnect the product from power when it

is in the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].
The LED of the [POWER] key is switched off.

2. Disconnect the product from the power source.

4.8

 

Connecting external devices

The following interfaces for external devices are provided:

●

USB connectors at the front and rear panel of the instrument

●

Monitor connector DVI-D at the rear panel of the instrument

●

Connecting USB devices

................................................................................ 24

●

Connecting an external monitor

...................................................................... 26

4.8.1

 

Connecting USB devices

The USB interfaces on the front and rear panels allow you to connect USB devi-
ces directly to the instrument. The number of USB connectors can be increased
by using USB hubs. Due to the large number of available USB devices, there is
almost no limit to the expansions that are possible with the R&S

 

RTE.

The following USB devices can be useful, for example:

●

USB flash drives to save screenshots and measurement results, and for easy
installation of firmware applications

●

Keyboard and/or mouse to simplify the operation and the entry of data, com-
ments, filenames, etc.

●

Printer to print measurement results and screenshots

You can connect or disconnect all USB devices during operation of the instru-
ment.

Connecting external devices

Summary of Contents for RTE


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands