R&S QAR50, User Manual

Page: 26 / 67

Instrument tour
R&S
®
QAR50
26 User Manual 1179.4992.02 ─ 02
For more information about system calibration, contact your service representative or
refer to the service manual.
5.1.6 Supporting feet
Number of supporting feet : 2
Function : The supporting feet provide a means to support the R&S QAR50.
Depending on how you install the R&S QAR50, the supporting feet are either located
on the bottom of the main body of the R&S QAR50 or on the side body that contains
cluster "2".
For more information about installing the supporting feet, see "Attaching the supporting
feet" on page 15.
5.1.7 Mounting holes
Number of mounting holes : 20
Location of mounting holes :
●
8 x mounting holes on the top of each of the side bodies.
Function : These mounting holes provide a means to mount lifting equipment to the
R&S QAR50.
●
4 x mounting holes on the outer side of each of the side bodies.
Function : These mounting holes provide a means to mount the supporting feet or
lifting equipment to the R&S QAR50.
●
4 x mounting holes on the bottom of the main body.
Function : These mounting holes a means to mount the supporting feet to the
R&S QAR50.
Caps (M8X16 screws) cover the mounting holes if the mounting holes are unused.
For more information about mounting supporting feet and lifting equipment, see
"Attaching the supporting feet" on page 15 and "Lifting the R&S QAR50 out of the
transport box" on page 12.
5.2 Connectors and labels
The R&S QAR50 has several connectors for various purposes. All connectors are loca-
ted on the side of the R&S QAR50.
Connectors and labels