manualshive.com logo in svg

R&S NRQ6, Getting Started, Page: 44 / 61

Share
Download
R&S NRQ6 Getting Started Download Page 44

Operating Concepts

R&S

®

NRQ6

44

Getting Started 1178.3705.02 ─ 07

If the R&S

 

NRQ6 is in remote mode, the status is displayed next to the status

LED, see 

Figure 6-2

.

Sensor information

(3) in 

Figure 6-1

Serial number of the R&S

 

NRQ6 and installed firmware version

Top pane

(4) in 

Figure 6-1

Stays always visible.

Navigation pane

(5) in 

Figure 6-1

For displaying measurement and system settings in the settings pane.

Settings pane

(6) in 

Figure 6-1

Displays the settings you have selected in the navigation pane.

Result pane

(7) in 

Figure 6-1

Displays the result for the selected measurement mode.

6.2.2

 

Tooltips

The web user interface provides tooltips on parameter functions and remote con-
trol commands.

If you place the cursor over the name of a parameter field, a short description of
the parameter function is displayed.

If you place the cursor over a parameter field, the short form of the corresponding
remote control command is displayed.

Browser-Based User Interface

Summary of Contents for NRQ6






























































Reviews:

No comments