R&S NRQ6 Getting Started Download Page 39 | Manualshive

Page: 39 / 61

R&S NRQ6 Getting Started Download Page 39

Operating Concepts

R&S

®

NRQ6

39

Getting Started 1178.3705.02 ─ 07

6

Operating Concepts

For operating the R&S

NRQ6, you can choose from the following possibilities:

●

Chapter 6.2, "Browser-Based User Interface"

●

Chapter 6.3, "R&S NRX"

●

Chapter 6.4, "Remote Control"

Also, the R&S

NRQ6 is supported by the R&S Power Viewer. The R&S Power

Viewer is provided on your documentation CD-ROM and on the Rohde &
Schwarz website as a separate standalone installation package.

6.1

R&S NRP Toolkit

Before you start using the power sensor, it is recommended to install the
R&S NRP Toolkit.

The R&S NRP Toolkit is the basic software package that supplies low-level driv-
ers and tools for all power sensors. The components of the R&S NRP Toolkit
depend on the operating system.

6.1.1

Versions and Downloads

The R&S NRP Toolkit is available for the Microsoft Windows operating systems
listed under

Chapter 6.1.2, "System Requirements"

on page 40, Linux distribu-

tions and MacOSX. Several R&S NRP Toolkit versions are available on your doc-
umentation CD-ROM.

The latest version for Windows is available at

www.rohde-schwarz.com/software/

.

To obtain an R&S NRP Toolkit for an operating system other than Microsoft Win-
dows, contact the Rohde & Schwarz customer support:

customersupport@rohde-

R&S NRP Toolkit

«
...
37
38
39
40
41
...
»

Summary of Contents for NRQ6






























































Reviews:

No comments