R&S NRQ6, Getting Started, Page: 19 / 61

Preparing for Use
R&S
®
NRQ6
19 Getting Started 1178.3705.02 ─ 07
See Chapter 4.6.1.3, "Setup with a PoE+ Injector" , on page 22.
4.6 Connecting to a Controlling Host
For operating the R&S NRQ6, you can choose from various possibilities. For
details, see Chapter 6, "Operating Concepts" , on page 39.
The suitable interface depends on the controlling host:
●
Computer
LAN interface
USB interface
●
R&S NRX
Host interface
Contents:
● Computer Using a LAN Connection ................................................................ 19
● Computer Using a USB Connection ................................................................25
● R&S NRX Base Unit ........................................................................................28
4.6.1 Computer Using a LAN Connection
There are different ways to connect the R&S NRQ6 to a computer according to
the available equipment. The power for the R&S NRQ6 is supplied over the LAN
PoE+ interface.
Further information:
●
Chapter 4.5, "Connecting to a Power Supply" , on page 18
●
Chapter 7, "Remote Control Interfaces and Protocols" , on page 51
Contents:
● Setup with a PoE+ Ethernet Switch ................................................................ 20
● Setup with a PoE+ Injector and a Non-PoE+ Ethernet Switch ........................21
● Setup with a PoE+ Injector ..............................................................................22
● Establishing a Connection ...............................................................................22
● Using Hostnames ............................................................................................23
● Assigning the IP Address ................................................................................ 24
Connecting to a Controlling Host