R&S FS300
Spectrum Analyzer
Operating manual, 02/2006
6-75
E-1007.9900.15
6.2 Spectrum
Analyzer
Introduction
The R&S FS300 measures signal spectra over the selected frequency range
using the selected resolution bandwidth and sweep. The time characteristic
of the amplitude at the set frequency is displayed in zero span.
User interface
When the R&S FS300 is switched on and the selftest passed, the spectrum
analyzer’s user interface is activated. The following is displayed on the
screen [13]:
Menus for configur-
ing and starting
measurements
The menus used to set the spectrum analyzer are displayed in the menu
area. The order of the menus mirrors that of the procedure for configuring
and starting measurements:
Selecting the frequency span
( 6-76)
(setting the x axis in the diagram area)
Setting the level axis and the RF input
( 6-87)
(setting the y axis in the diagram area)
Signal analysis with marker functions
( 6-96)
Setting the bandwidths and the sweep time
( 6-121)
Displaying the trace
( 6-130)
Triggering the measurement
( 6-140)
Measurement functions
( 6-145)
Summary of Contents for FS300
Page 1: ...2 2006...
Page 16: ......