Control Concept
R&S FS300
E-1007.9900.15
7-214
Operating manual, 02/2006
Selecting the unit
The entry is made in the active measurement unit, which is indicated after the
numeric value in the entry field and can be changed. Make sure that there are
no spaces between the numeric figure and the measurement unit.
You may omit the base unit (e.g. Hz, s, dBm). However, you must specify the
unit size (valid values: G, M, k, m, u, n, p).
Input examples
Span:
15k
15kHz
150000
15M
Sweep Time:
34m
34ms
34
34u
Inputting with arrow
keys
Inputting using the arrow keys can be done in a number of different ways:
Selecting a decimal point and incrementation or decrementation
with the
6
/
5
arrow keys on the keyboard
4
x
6
Incrementing or decrementing
with the arrow keys on the user inter-
face
4
x
NOTE:
When entering the center frequency, increment size can be set on the
rotary knob ( 6-79). The value is then incremented or decremented accord-
ing to this set value.
Invalid
parameter entry
If a parameter entry is invalid, the value will automatically be limited, and an
error message indicating the valid value range will appear in the parameter
field, e.g.:
•
Acknowledge the error message with the mouse or the Enter key and
repeat the entry with the correct value.
Summary of Contents for FS300
Page 1: ...2 2006...
Page 16: ......