Control Concept
R&S FS300
E-1007.9900.15
7-212
Operating manual, 02/2006
7.5.4
Setting the Parameters
Introduction
Parameters can be set in different ways:
Selecting an instrument function directly (command button)
Selecting settings in the selection fields
Inputting numerical parameters in the input fields
Moving markers
The keyboard and mouse can be used for the settings ( 7-207).
7.5.4.1 Direct
Selection
of a Instrument Function
Various methods are
possible
Some instrument functions are executed immediately after selection, e.g.,
automatic setting of the HF input attenuator.
Instrument parameters (control buttons) can be selected in different ways:
Selecting and switching on using a pull-down menu
. The current
setting is indicated by a tick mark (
D
).
Selecting using a toolbar menu
and
switching on in the function
display
Summary of Contents for FS300
Page 1: ...2 2006...
Page 16: ......
