R&S 4200 Series, Operating Manual

Page: 99 / 220

Local Control (Local Mode) R&S XU 4200
3.47 6166.5368.02.01
PARAMETER menu\PARAMETER menu "Radio".doc
3.4.7.4.1 TX PARAMETER Menu
Meaning
of entries
T X P a r a m e t e r L O C
P W R
0 W 5 0
4 9
M O D
0
% 1 0 0
7 2
S W R
1
2 5
1 . 3
T e s t P T T T e s t T O N E
Fig. 3.30 TX PARAMETER menu.
For ACARS mode, the last line of the MMI will change in order to provide
1200 Hz and 2400 Hz Test Tone.
T e s t 1 k 2 T e s t 2 k 4
Fig. 3.31 TX PARAMETER menu in ACARS mode.
T e s t D 8 P S K
Fig. 3.32 TX PARAMETER menu in VDL Mode 2.
Display text Values Description
TX Parameter Menu name
PWR 49 W Display of transmit power as a bar chart and numeric
value (with decimal place up to 9.9 W; no decimal place
starting from 10 W).
MOD 72 % Display of modulation depth for AM as a bar chart and
numeric value, for example.
SWR 1.3 Display of the antenna matching as a bar chart and
numeric value (optimum, VSWR = 1; otherwise, value in
range 1 to approx. 26).
Test PTT − Test for PTT function
Transmitter can be powered up in the unmodulated CW
mode via the ENTER key.
Note: Only available in AM mode.
Test TONE − Test for TONE function
Transmitter can be powered up at a test modulation
1 kHz and the configured AM modulation depth via the
ENTER key.
Note: TX transmission is switched on as long as the
ENTER key is pressed or until the timeout PTT timer
switches off the transmission.
Note: Only available in AM mode.
Test 1k2 – Test for TONE function
Transmitter can be powered up at a test modulation