R&S 4200 Series, Operating Manual

Page: 78 / 220

R&S XU 4200 Local Control (Local Mode)
6166.5368.02.01 3.26
3.4.1 Overview of Operation
Overview of operation\Overview of operation "Radio".doc
Standard
Operating Display
Main Menu
Operation Time/Date Measurement CBIT Status Inventory Configuration
ESC MENU
Picture: Menu Guide MMI
Activation
Boot Display
Boot process finished
Preset No
Mode
Frequency
Offset TX
TX Parameter
RX Parameter
Supply
Temperature
Component
No 1
Component
No 2
Component
No N
ESC Enter
ESC
ESC
ESC
IP Address
Frequency
Block
ESC
External
Voltages
RF Power
RX Thresholds
Display
Settings
Options
Audio Delay
TX Modulation
Depth
Audio
Interface
Fig. 3.7 Overview of operation.
Menu control The transceiver is menu-driven using the keypad (see chapter 3.4.2).
The MENU key takes you to the main menu at any time. From the main
menu, you can reach lower menus/submenus by using the cursor keys and
the ENTER key. Pressing the ESC key takes you to the next-higher menu.
If you are in the main menu, you can go to the standard operating display
by pressing the ESC key.