R&M STAGEMAKER SM1, Technical Manual

Page: 8 / 53

R&M Materials Handling, Inc STAGEMAKER
®
Concert Hoist
Springfield, Ohio USA Technical Guide
 :
800 955-9967 June 2009
www.rmhoist.com
RM-STGMKR-TG-2002-6-ENG.doc
8
®
3 Hoist Configurations
3.1 Hoist Configuration A – Direct Motor Control for Mobile Installations
Configuration A utilizes three-phase direct motor control for easier setup and cabling. The hoist is
equipped for mobile installations so it can be mounted in the normal or inverted position. A direct motor
control hoist in the inverted position is best suited for temporary or short-term setups. Full line voltage
controller furnished separately.
Hoist features:

Black load chain

Non-reflecting matt black finish

Swiveling body hook

External chain guide (SM5 and SM10, Chainflux)

Disc Brake

Over-travel protection via the torque limiting device
(1)

Steel electrical enclosure (except SM1, NORYL plastic)

ACF brake controller card

Chain bag for 100 ft [30 m] of chain

Handgrips

No pigtail or plug

Round cable gland for 5/16”-9/16” [8-15 mm] diameter cable

208V/230V-3Ph-60Hz motor rating
(1)
Upper and lower electrical limit switches not available with direct motor control
Available options:

Self locking hook (SM5 and SM10)

Fixed body hook

Second brake (SM5 and SM10)

Steel control enclosure for SM1

Vinyl rain cover

Drain hole in the load sprocket compartment (SM5 and SM10 only)

Power pigtail – no plug (standard pigtail length is 18”, longer lengths available)

Blue CE male plug for pigtail

Twist-lock male plug for pigtail

Blue CE female receptacle

Twist-lock female receptacle
Controller:

4 channel compact controller in a hand case

8 channel compact controller in a hand case
Accessories:

Remote with GO button and E-stop and with 30 ft of cable

Motor cables

Single and twin flight cases (SM5, SM10 only)