R&M STAGEMAKER SM1, Technical Manual

Page: 24 / 53

R&M Materials Handling, Inc STAGEMAKER
®
Concert Hoist
Springfield, Ohio USA Technical Guide
 :
800 955-9967 June 2009
www.rmhoist.com
RM-STGMKR-TG-2002-6-ENG.doc
24
®
4.4 Pushbutton Pendant Controller for Configuration B (SM16 – SM25) or D
The pushbutton pendant controller can be suspended from the hoist and is available for the SM16, SM20
and SM25 models and for the Configuration D hoist controller.
Features:

Pendant cord length matches hoist height of lift without plug

Pushbutton enclosure ratings of IP65 (NEMA 4 Type)

Suitable for indoor or outdoor use

Pendant station is light in weight for easy handling and operation

Strain relief

Emergency Stop is a push-to-maintain, turn-to-release, red mushroom head button

Two push buttons for each motion, one for each direction of travel

Contacts for motion buttons are mechanically interlocked and momentary type
Optional Features:

Longer cable lengths

Plug
4.5 Programmable Controller for Configuration C

Third-party controller
4.6 Controller for Configuration D
These controllers are designed specifically for the Configuration D hoist and provide a complete BGV-C1
package. The control functions are on the controller. A remote with a GO button (run command) and E-
stop is available as an option.
Model Number of
channels
Description Enclosure Connection
B2PRMLV-C1 2 Low voltage c controller Wall mount 16 pin Harting
R4PRMLV-C1 4 Low voltage c controller 19” 6U rack in flight case 16 pin Harting
R8PRMLV-C1 8 Low voltage c controller 19” 6U rack in flight case 16 pin Harting
R12PRMLV-C1 12 Low voltage c controller 19” 6U rack in flight case 16 pin Harting
Specification:

Low voltage (48 VAC) control, Configuration D hoists, a BGV-C1 controller

The control circuit of the mainline contactor in the hoist control panel becomes part of the
RxPRM type controller.

Single hoist up to 1.44HP [1.1kW] per channel at 230V-3Ph-60Hz

3 position selector switch (UP-OFF-DOWN) per channel (group control)

One GO (run command) button (effective only on channels selected via selector switch)

Emergency Stop

Short circuit proofing: once at 10kA maximum

Individual level correction

Phase inversion capability on incoming CE plug

Connection cable (2 ft length) for interconnection between controllers
Available Options:

Flight cases of different sizes for one, two or three racks

Remote with a GO button and E-stop
4.7 Controller for Configuration E

Third-party controller