R&M Materials Handling, Inc
STAGEMAKER
®
Concert Hoist
Springfield, Ohio USA
Technical Guide
:
800 955-9967
June 2009
www.rmhoist.com
RM-STGMKR-TG-2002-6-ENG.doc
21
®
3.7 Hoist
Configuration
V
– Variable Speed Control
Configuration V utilizes three-phase power, low voltage control and a separate controller. The hoist is
mounted in the normal position, but when specially equipped, the hoist can also be mounted in the
inverted position.
Hoist features:
Hoist inverter for stepless speed control
Black load chain
Non-reflecting matt black finish
Fixed body hook
Standard chain guide
Disc Brake
Torque limiting device
Upper and lower electrical limit switch (weight-operated)
Steel electrical enclosure
Chain bag for 100 ft [30 m] of chain
Low voltage (115 VAC) control
Connection pigtail with a Harting or equal (16 pin + ground) metallic male plug for control and
power (standard pigtail length is 18”, longer lengths available)
Hoist motor thermal protection
460V-3Ph-60Hz power supply
Sensor bearing and speed supervision system
Note:
Mainline contactor is specially wired so it is always energized when power to the hoist is
applied.
Available options:
Inverted mounting position - includes a Chainflux chain guide, handgrips, and a swiveling top
hook. Upper and lower electrical limit switches (weight-operated) are removed and a geared
limit switch is added.
Swiveling body hook
Self locking hook
Geared limit switch
Second brake
Vinyl rain cover
Drain hole in the load sprocket compartment
Handgrips
Controllers:
Controller with 16 pin connection
Accessories:
Motor cables
