Rand McNally intelliroute TND 500 User Manual Download Page 49

Page: 49 / 111

Rand McNally IntelliRoute

TND

500 User’s Guide

Find a Location by Tapping on the Map

Tap on the Map and Avoid the Location

With a map displayed:

The crosshairs ()(crosshairs.bmp) display over your current location.

Touch and drag the map until the crosshairs are centered over the location.
The

Tap on Map Location Window

displays.

You may select

“Route to Here”

, or

“Avoid”

. If you select Avoid, this

segment is blocked permanently, until you select it again, and choose

“Remove Avoid”

Tap

Back

to save changes.

The

Confirmation Window

displays.

See “Route Map Window” on page 68 for more options.

Tap Map Location Window

Map Window

Summary of Contents for intelliroute TND 500
















































































































Search results

Summary of Contents for intelliroute TND 500

Reviews:

Related manuals for intelliroute TND 500

Brands by name

Popular brands

Rand McNally intelliroute TND 500, User Manual

Search results

Summary of Contents for intelliroute TND 500

Reviews:

Related manuals for intelliroute TND 500

Brands by name

Popular brands