4
22. ALWAYS
make certain the tool is at right
angles (90°) in both directions to the work
surface before firing (
Fig. 1 ,2 & 3
).
23. NEVER
fire tool at an angle to the work
surface.
24. NEVER
use the tool at or near the extremities
of your reach. (see illustrations
Fig. 4 & 5
).
25.IF A LOADED TOOL JAMS
in the firing
position, it should be locked in a secure
place where no harm could result if it
accidentally discharged.
DO NOT
attempt
to make any adjustments to the tool.
Call your Ramset representative or supplier.
26.IF A MISFIRE OCCURS
the tool should
be kept firmly against the worksurface for
a short time. Refer to the local PA Tool
Regulations for the minimum delay time.
(Aust./N.Z./S.E.Asia 10 Sec./UK. 30 Sec.).
27.NEVER
use Ramset Power Loads in
firearms. They are much more powerful than
ordinary ammunition and must be used only in
powder-actuated tools.
28.ALWAYS
wear safety eye and hearing
protection when using a PA Tool (
Fig. 6 & 7
).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Safety Precautions cont.
