Loco-1 / Loco-2
V1.1 - English
page 4 of 36
When making electrical connections pay attention to sufficient wire
cross section.
After the formation of condensate on the parts wait for at least two
hours for drying off before you switch power on.
Danger of burns!
Some components on the decoder can achieve a
high operating temperature!
Warning: risk of burns!
Please note during installation that the
soldering experiences high temperatures. Use safety glasses when
soldering if possible! There may be solder squirts that can get on
your skin or in your eyes.
Warning: risk of fire!
Please note that in case of use of a soldering
iron fire hazard exists! Do not leave the switched-on soldering iron
unattended! There is a fire hazard if the soldering iron is in contact
with flammable materials!
Only use lead-free solder for the installation of the decoder!
