Check the installation. Check the pump and the other hydraulic components.
The hammer is equipped with a built-in Ramvalve which is designed to decrease oil
flow to the hammer when oil flow from the carrier is too high. If impact rate is too
slow check the oil flow. Contact your local carrier dealer for more information.
The hammer must be serviced in an authorized Rammer service shop.
The hammer must be serviced in an authorized Rammer service shop.
The hammer must be serviced in an authorized Rammer service shop.
Check the hammer control valve in the carrier.
Refer to recommended use and to correct working methods. See “Daily operation”
on page 28.
Assemble an extra oil cooler.
Check the installation. Check the relief valve operation. Adjust the relief valve in
hydraulic circuit. Measure the high pressure in the hammer inlet line. Contact your
local dealer for more information.
Check hydraulic oil. See “Requirements for hydraulic oil” on page 46.
Check the installation. Check the pump and the other hydraulic components.
The hammer must be serviced in an authorized Rammer service shop.
Check the installation. Check the size of the return line.
