Refer to recommended use and to correct working methods. See “Operating
instructions” on page 25.
Refer to recommended use and to correct working methods. See “Daily operation”
on page 28.
Refer to recommended use and to correct working methods.
Refer to recommended use and to correct working methods. See “Daily operation”
on page 28. There is a wider selection of tools available for different applications.
Consult with your local dealer for more information.
Cold conditions. Apply grease from grease gun to grease nipples.
Doser adjusting is wrong for the application. The doser must be readjusted. See
“Adjusting the dose” on page 42.
Blockage in greasing device. Contact your local dealer for more information.
Doser adjusting is wrong for the application. The doser must be readjusted. See
“Adjusting the dose” on page 42.
Leak in the doser. The doser must be replaced. Contact your local dealer for
more information.
Grease cartridge is empty or damaged. Replace the grease cartridge. See
“Automatic greasing” on page 41.
Doser defective. The doser must be replaced. Contact your local dealer for more
information.
Leak in the grease hose or pressure hose. Inspect the hoses and replace if
necessary.
Grease and pressure hoses are installed backwards. Swap the hoses.
To continue troubleshooting, disconnect the grease hose from the hammer
valve body and operate the hammer. After 10 minutes of operation check if
grease has protruded from the grease hose.
