Regular Cab Trucks:
In the regular cab truck, the top tether anchorages are located behind the center and
right passenger seats. There is a plastic cover over each anchorage. To attach the
tether strap of the child restraint:
1. Place the child restraint on the seat and adjust the tether strap so that it will reach
over the seat back, under the head restraint and to the tether anchor directly
behind the seat.
2. Route the tether strap to provide the
most direct path between the anchor-
age and the child seat. The tether
strap should go between the head
restraint posts underneath the head
restraint. You may need to adjust the
head restraint to the upward position
to pass the tether strap underneath
the head restraint and between its
posts.
3. Lift the cover (if so equipped), and
attach the hook to the square opening
in the sheet metal. Tighten the tether
strap according to the child seat
manufacturer’s instructions.
WARNING!
Never place a rear-facing child restraint in front of an air bag. A deploying
Passenger Advanced Front Air Bag can cause death or serious injury to a child
12 years or younger, including a child in a rear-facing child restraint.
Crew Cab Trucks:
The top tether anchorages in this vehicle are tether strap loops located between the
rear glass and the back of the rear seat. There is a tether strap loop located behind
each seating position. Follow the steps below to attach the tether strap of the child
restraint.
Regular Cab Tether Anchorages
1 — Tether Strap Hook
2 — Tether Strap to Child Restraint
3 — Tether Anchor
G E T T I N G S T A R T E D
54
Summary of Contents for CHASSIS CAB 3500 2017
Page 271: ...NOTES 269...
Page 272: ...NOTES 270...
Page 273: ...NOTES 271...
Page 274: ...NOTES 272...
