RAM CHASSIS CAB 3500 2017, User Manual

Page: 61 / 276

NOTE:
Do not reposition the head restraint 180 degrees to the incorrect position in an
attempt to gain additional clearance to the back of the head.
Rear Head Restraints
The rear seats are equipped with adjustable and removable head restraints. To raise
the head restraint, pull upward on the head restraint. To lower the head restraint,
push the adjustment button located on the base of the head restraint and push
downward on the head restraint.
To remove the head restraint, push the adjustment button and the release button
while pulling upward on the whole assembly. To reinstall the head restraint, put the
head restraint posts into the holes and adjust it to the appropriate height.
NOTE:
To remove outboard restraints, the rear seat bottom must be folded up.
WARNING!
A loose head restraint thrown forward in a collision or hard stop could cause
serious injury or death to occupants of the vehicle. Always securely stow removed
head restraints in a location outside the occupant compartment.
NOTE:
• The rear center head restraint (Crew Cab and Quad Cab) has only one adjustment
position that is used to aid in the routing of a tether. Refer to “Occupant
Restraints” in “Things To Know Before Starting Your Vehicle” in the Owner's
Manual on www.ramtrucks.com/en/owners/manuals for further information.
• Do not reposition the head restraint 180 degrees to the incorrect position in an
attempt to gain additional clearance to the back of the head.
WARNING!
ALL the head restraints MUST be reinstalled in the vehicle to properly protect the
occupants. Follow the re-installation instructions above prior to operating the
vehicle or occupying a seat.
G E T T I N G S T A R T E D
59